耐酸鹼化型乾式真空幫浦

607 blower, CD-250 dry pump.
Capacity 525 cfm at 1 torr

Chem-Dry pumps use no fluids for seal-
ing, eliminating the possibility of their
contaminating your process or causing
downstream pollution. You get a purer
process and end product and save on
waste disposal, fluids, and labor.

ReqUCSt Bulletin CD1-B

CD Series Dry Pump Specifications:

優點:
Chem-Dry pumps use no fluids for seal-
ing, eliminating the possibility of their
contaminating your process or causing
downstream pollution. You get a purer
process and end product and save on
waste disposal, fluids, and labor.

Sizing: Stokes Vacuum Dry Pumps are staged
dry lobed mechanical pumps. They develop base
pressures to 1 torr or better and are available in a
wide range of sizes. Because the pumps are true
dry backing pumps, they can be employed with
rotary lobed blowers for more speed and lower
pressure (0.03 torr typically).

特點:
Vacuum Distillation and Solvent
Stripping - excellent for solvent recovery
Pharmaceutical Production -
recovery of solvents, collection of
intermediates
Pilot Vacuum Processes - differen-
tial condensation, recovery of high-
boiling intermediates
Flavors and Fragrances - enhanced
recovery of essential oils, terpinoids,
and complex flavor concentrates
Medical Device Fabrication - clean,
sterilizable vacuum pump for
implantable device manufacture.
Recovery of ethylene oxide gas
sterilants
Materials Research - pump aggres-
sive gases safely at high flows and
concentrations
Fatty Acid Production - elimination
of water pollution and drain blockage
from ejector effluents

CD Series Dry Pump/Blower Systems Specifications 

Chem-Dry Eagle Features and Benefits

590-7
優點:
The New Chem-Dry Eagle Series pumps are ultra compact and need no inter-stage heat exchangers, drain tanks, or external pipling. Plus they can run hot or cold and handle wet acids. All models use two parallel single-piece tri-lobe rotors, gear driven with precision bearings.

特點:
Vertical flow path - for efficient partic-
ulate handling
Horizontal construction - for ease
of service
Built with materials that can
withstand tough service
Direct cooling of process gas via
the unique flow path design
Isothermal compression
No cold spots on the pumping
chamber wall due to direct cooling
Small and compact
Temperature controllable
Constant horsepower over the
operating range
Able to handle liquid upsets with-
out the need to reset a shear pin
Can operate at any point on the
performance curve and handle
bursts of air

Request Bulletin CDE-1

Eagle Dry Pump/Blower Systems Specifications