|Portable Dry Leak Detector|
|The innovative concept of the ASM 122
D makes it the ideal portable dry leak detector to meet any
maintenance needs for clean applications.|
It is recommended
for a wide range of applications:
vacuum systems in the semiconductor industry|
●Leak testing components (valves, filters,
●Maintenance of system chambers in
the research and developments
laboratories (beam lines,
vacuum systems, etc.)
environment operation (aerospace industry, instrumentation,
medical and pharmaceutical industry, food industry,
and user-friendly interface
The ASM 122 D is a self-contained unit
integrated to a cart with a minimal footprint and exceptional
The ASM 122 D offers unmatched
performance in all test modes:
> Sniffing mode: The new
auto-zero function ("floating-zero" method) delivers the ability to
measure leaks as small as 1.107 mbar.l/s.
> Inboard testing
●The 4 1/s (240 1/min.) helium
pumping speed and the compression ratio of its high vacuum pumps
provide ultra-fast response and recovery time.
●Sensitivity of 5.10'2 mbar.l/s.
A very comprehensive display control panel,
with direct access to integrated functions, makes this unit easy to
operate for any end-user.
which meets every user
●Rugged remote control: very easy to use and easy to
hold. The helium signal is displayed in two different ways : dynamic
green/red bargraph to highlight the fast evolution of the signal and
display to get a high resolution and a direct
●Variable pitch audio alarm
proportional to the helium signal amplitude for easy location of
leaks in complex systems.
indicates the user mode, settings,
(preventive and corrective
maintenance), all of
|Easy-to-use and effective
●Auto-calibration with built-in temperature
compensated calibrated leak.
●Auto-calibration during the start-up sequence and the
ability to activate periodic auto-calibration.
●All pertinent information related to the
auto-calibration process and its settings.
correction processed by
the detector through an
manually adjust the
correction factor (for direct readout
the helium signal regardless of
the leak rate
auto-zero function is an advanced feature which allows the operator
to conveniently improve the sensitivity of the detector when the
measurement becomes more difficult due to a high
●The auto-zero function is
even more helpful in sniffing mode, for suppressing the background
signal due to the residual helium in the air (5 PPM) enhancing the
sensitivity up to 1.107 mbar.l/s.
principle of the function is to subtract the background'in order to
focus on the helium signal. The new method developed by Alcatel is
based on a specific algorithm ("floating zero" method) which
eliminates the display of erroneous results and guarantee to detect
any size leaks.
All these functions are directly accessible
by depressing one single key switch.
SHANG HAUR INDUSTRIAL CO., LTD.
NO.142,DAH AN Road, Tu Cheng City,
TAIPEI HSIEN, TAIWAN, R.O.C.