SD series 2 stages 2005SD - 2010SD - 2015SD - 2021SD - 2033SD - 2063SD - 2100SD Adapted to all current non-corrosive applications : ● Lamps manufacturing ● Neon signs manufacturing ● Electron tubes evacuation ● TV tubes manufacturing ● Metallurgy ● Centrifuges....   SD series rotary vane pumps address the requirements of all major vacuum applications in diverse industries. From 5 to 21 m3/h /h: ●no oil mist pollution at the exhaust : the natural lubrication design offers the lowest oil mist level, even with high throughputs or frequent cycling between atmosphere and ultimate pressure. ●compact design : reduced dimensions, choice of horizontal or vertical inlet and exhaust ports, all controls and service access located on the front. ●optimized tightness : integrated anti-suckback ; all static seolings secured by 0-rings; external shaft seal can be renewed easily, without dismantling the pump. ●universal single-phase and three-phase motors : see page 18. From 33 to 100 m3/h/h: ●forced lubrication for continuous operation at all pressures. ●built-in anti-suckback, activated by the oil pump, for protection of vacuum system against pressure rise. ●rugged design for improved efficiency and reliability. ●universal and specific three-phase motors, in line with international requirements (see ordering information pages 40 and 41). From 5 to 100 m3/h : ●high pumping speed from atmosphere to vacuum. ●efficient gas ballast for vapor pumping. ●air cooleed for optimum performance ●field serviceable, using the appropriate maintenance kits. 2010SD 2033SD 2100SD Specifications SD series 2 stages   Units 2005SD 2010SD 2015SD 2021SD 2033SD 2063SD Nominal pumping speed (*) 50Hz 60hz m3/h cfm 5.4 3.8 9.7 6.8 15 10.6 20.7 14.6 30 23.3 60 42.4 Pneuropl pumping speed (*) 50Hz 60hz m3/h cfm 4.8 3.4 8.5 6 12 8.8 15.5 11.8 27 18.8 55 38 Ultimate partial pressure (*) mbar 10-4 10-4 10-4 10-4 2.10-4 3.10-4 Ultimate total pressure (*) closed gas ballast mbar 2.10-3 2.10-3 2.10-3 2.10-3 2.10-3 2.10-3 Ultimate total pressure (*) open gas ballast mbar 10-2 10-2 10-2 10-2 2.10-2 2.10-2 Water vapor capacity 50/60Hz g/h 120/110 125/100 110/100 90/90 700 1200 Water vapor pressure 50/60Hz mbar 35/25 20/15 12/10 7/7 30 25 Weight (max) kg(lbs) 25(55) 26(57.2) 27(59.4) 28(61.6) 61(134) 93(205) Dimensions see page 25 25 25 25 27 27 Electrical motors see page 8 8 8 8 31 31 Max nominal power rating 50/60Hz kW 0.45/0.55 0.45/0.55 0.45/0.55 0.45/0.55 1.1/1.3 2.2/2.6 Min ambient temperature 0C(0F) 12(54) 12(54) 12(54) 12(54) 12(54) 12(54) Max ambient temperature 0C(0F) 45(113) 45(113) 45(113) 45(113) 45(113) 45(113) Oil capacity l 0.83 0.95 0.95 0.98 3.6 7 Inlet flange ISO-KF DN25 DN25 DN25 DN25 DN40 DN40 Exhaust flange ISO-KF DN25 DN25 DN25 DN25 DN40 DN40 (*): according to Pneurop specifications; with ALCATEL mineral oil. Maintenance kits In order to simplify maintenance performed in the field, ALCATEL provides maintenance kits including interchangeable components. ●Minor kit includes all necessary seals (shaft seals, valves, o-rings...) ●Major kit includes Minor kit plus vanes, springs, plugs... ●Shaft seal kit (for 2005SD to 2021SD) includes all components (lip seal, shaft sleeve...) necessary for fast periodic renewal of external shaft seal. Accessories ALCATEL offers a comprehensive range of accessories (mist eliminators, filters, traps...) in order to optimize pump operation in various running conditions. These accessories are described page 45 to 62. Oils Oils of different viscosities and specifications are available, to enable customers to obtain the best performance from rotary vane pumps, under different application conditions. See pages 42 and 43. Pumping speed characteristics See pages 29 to 33 for pumping speed/pressure and pressure drop curves. Ordering information: see pages 38 to 41.